What Is the Close Parenthesis in Morse Code?
The Morse code for the closing parenthesis ()) is -.--.- — a sequence of 6 signals: dash, dot, dash, dash, dot, dash. The closing parenthesis “)” is six signals: dash dot dash dash dot dash. Note it’s the open-paren pattern plus one trailing dash.
When you search for “closing parenthesis in morse code”, “morse code for closing parenthesis”, “) in morse code”, or “morse code )”, the answer is the same ITU-standard pattern: -.--.-. Other common names for this character include right parenthesis, close bracket.
When to Use the Close Parenthesis
Closing parenthetical asides in Morse-encoded text. In high-speed CW conversation, operators often skip non-essential punctuation — but for clarity, accuracy and written transcripts, the closing parenthesis stays as -.--.-.
Practice: What Is the Morse Code for the Close Parenthesis?
Select the correct Morse code for the closing parenthesis ()):
How to Tap the Close Parenthesis in Morse Code
To transmit the closing parenthesis (-.--.-), use this sequence:
ITU Timing Rules
- Dot (·) = 1 unit
- Dash (−) = 3 units (3× longer)
- Signal gap = 1 unit
- Letter gap = 3 units
- Word gap = 7 units
Timing Reference Table
| Speed | Dot | Dash | Letter gap | Word gap |
|---|---|---|---|---|
| 5 wpm | 240ms | 720ms | 720ms | 1680ms |
| 10 wpm | 120ms | 360ms | 360ms | 840ms |
| 17 wpm (this page) | 70ms | 210ms | 210ms | 490ms |
| 20 wpm | 60ms | 180ms | 180ms | 420ms |
How to Remember the Close Parenthesis in Morse Code
Dash-dot-dash-dash-dot-dash — same as opening paren, but with one extra dash at the end to “close” it.
Frequently Asked Questions — Close Parenthesis in Morse Code
The closing parenthesis ()) in Morse code is -.--.- (2 dots, 4 dashes). It’s the standard ITU code used worldwide.
The Morse code for the closing parenthesis is -.--.-. Tap the sequence as: dash, dot, dash, dash, dot, dash, with a one-unit gap between each signal.
To send the closing parenthesis: long press, then short tap, then long press, then long press, then short tap, then long press. Keep one unit of silence between each signal and three units between this character and the next.
The closing parenthesis uses 6 signals total: 2 dots and 4 dashes. Most punctuation marks in ITU Morse use 5 or 6 signals.
Closing parenthetical asides in Morse-encoded text. Punctuation is optional in casual CW, but standard for formal messages and written transcripts.
Yes — -.--.- is defined by the ITU (International Telecommunication Union) Recommendation M.1677 and is used worldwide for the closing parenthesis.
Related Morse Code Punctuation
Other punctuation marks often used alongside the closing parenthesis: